English
中文简体Principle and structure of car vacuum cleaner
1. The principle of vacuuming. The fan impeller of the vehicle vacuum cleaner is driven by the motor at a high speed, and the air in the impeller is discharged out of the fan at a high speed, and at the same time, the air in the dust suction part is continuously supplemented into the fan. In this way, it may form a higher pressure difference with the outside. The dust and dirt from the suction nozzle are sucked into the dust collecting part along with the air, and pass through the leaker to collect the dust and dirt in the dust tube.
1. The principle of vacuuming. The fan impeller of the vehicle vacuum cleaner is driven by the motor at a high speed, and the air in the impeller is discharged out of the fan at a high speed, and at the same time, the air in the dust suction part is continuously supplemented into the fan. In this way, it may form a higher pressure difference with the outside. The dust and dirt from the suction nozzle are sucked into the dust collecting part along with the air, and pass through the leaker to collect the dust and dirt in the dust tube.
2. The original of the vacuum cleaner. Suction cleaners will also be equipped with a series of cleaning brushes and nozzles for cleaning corners.
3. Throat: All suction-type vacuum cleaners will be equipped with a hard hose, which is used to connect the soft hose and accessories for cleaning.
4. Electric brush: The cleaning head of the internal vacuum cleaner is a special accessory for hybrid vacuum cleaners.
5. Round brush head: Also has a smaller nozzle, which can do 360* rotation.
6. Flat nozzle: Also known as the gap nozzle, it is a slender, flat hard nozzle. Especially suitable for cleaning walls, radiant heaters, corners and shallow and narrow places.
7. Dust sweeping brush: Made of long and soft bristles, suitable for cleaning curtains, walls, etc. Cleaning method to remove foreign matter and filter bag method:
1. Remove the foreign matter from the mesh bag, press the spring and turn the mesh bag to remove it, insert your hand into the mesh bag to take out the filter bag, and pour out the foreign matter in the filter bag.
2. Cleaning the filter bag: a. Brush the filter bag. b. Shake the filter bag in the garbage bag. c. Wash with detergent. After cleaning, wipe with a paper towel and confirm whether it is kept clean before using it again.
3. Reinstall the filter bag: align the lower end of the filter bag with the mesh bag and install it together, causing the spring to be connected to the filter bag. How to clean the plastic part: Use a damp cloth with hot water and mild detergent, avoid using other detergents that may contain chemicals to avoid damaging the plastic part.
